-
Large‑Area Single‑Point InGaAs PIN Photodiode Short‑Wavelength Enhanced 0.6‑1.7μm OEM
1.Short-wavelength enhanced InGaAs PIN photodiode, spectral coverage 0.6μm-1.7μm (VIS-SWIR band). 2.Four aperture-size variants: Ø300μm / Ø455μm / Ø950μm / Ø1850μm for different light-receiving requirements. 3.Low dark current, high shunt resistance and high responsivity across v
-
Inner‑Outer Dual‑Zone Quadrant Photoelectric Module 400‑1100nm OEM
1.Inner-outer dual-zone photosensitive design: inner φ2mm, outer φ10mm. 2.400-1100nm spectrum, peak response at 1.06 μm, responsivity ≥1.5×10⁴ V/W. 3.Different dynamic-range performance for inner zone(>70dB) and outer zone(>57dB). 4.Hermetic sealing, high shock-resistance, wide t
-
GS-QD2416-3 Φ16mm Quadrant Photoelectric Module 400‑1100nm Compact High‑Sensitivity OEM
1.Large Φ16mm quadrant active photosensitive area. 2.400-1100nm spectral response for visible-near infrared detection. 3.Fast response, high-sensitivity quadrant sensing in compact housing. 4.Wide operating temperature range -40℃ ~ +50℃, good environmental adaptability.
-
GS-QD2410-X Φ10mm Quadrant Photoelectric Module 400‑1100nm TO25 TO37 Package OEM
1.Integrated Si-PIN quadrant detector with built-in amplifier, Φ10mm active receiving area. 2.400-1100nm spectral response, supports laser pulse detection starting from 8ns. 3.Wide 60dB-125dB dynamic range, fast response and high detection sensitivity. 4.13 model variants with di
-
GS-FPA-0640P15F 640×512 15μm Cooled Area‑array InGaAs Detector TE1/TE2 28‑pin SDIP OEM
1.Cooled InGaAs area-array, spectral options:0.9-1.7μm /1.1-1.9μm /1.2-2.2μm. 2.640×512 pixels, 15μm pixel pitch, 9.6 mm ×7.68 mm photosensitive target surface. 3.28-pin SDIP metal packaging, built-in TEC TE1/TE2 cooling, dual-gain adjustable. 4.Wide operating temperature-40℃~+70
-
GS-FPA-0640P15F-17-C 640×512 15μm Uncooled Area‑array InGaAs Detector 64‑pin CLCC
1.Uncooled InGaAs area-array, spectral band 0.9-1.7μm. 2.640×512 pixels, 15μm pixel pitch, 9.6 mm ×7.68 mm photosensitive target surface. 3.64-pin CLCC ceramic packaging, ultra-light 1.7g, built-in no TEC cooling. 4.Dual-gain readout, QE≥70%, effective pixel rate>99.5%, operating
-
GS-FPA-640×512 640×512 25μm Cooled Area‑array InGaAs Detector TE1/TE2 28-pin MDIP
1.Cooled InGaAs area-array, spectral band 0.9-1.7μm. 2.640×512 pixels, 25μm pixel pitch, 16 mm ×12.8 mm target active surface. 3.28-pin MDIP Kovar hermetic packaging, TE1/TE2 TEC cooling, dual-gain adjustable. 4.Low dark-current ≤0.2pA, max pixel readout rate 10MHz, high detectiv
-
GS-FPA-320×256-K 320×256 30μm Cooled Area‑array InGaAs Detector TE1/TE2 28-pin MDIP Package
1.TE1/TE2 two-stage TEC cooling optional, effectively suppress dark current noise. 2.Two spectral options: standard 0.9–1.7μm & extended 1.2–2.2μm band. 3.320×256 resolution, 30μm pixel, 9.6×7.68mm large photosensitive area. 4.Hermetic 28-pin MDIP Kovar packaging, stable performa
-
GS-FPA-320×256-C 320×256 30μm Uncooled Area‑array InGaAs Detector 44‑pin CLCC OEM
1.Uncooled design without TEC cooling, low power consumption 175mW. 2.320×256 resolution, 30μm pixel, large 9.6×7.68mm photosensitive area. 3.Low dark current, high quantum efficiency ≥70%, fill factor over 99%. 4.Compact lightweight 44-pin CLCC packaging, only 1.6g weight.